Jump to content

Mono recommendations.


wellyphant

Recommended Posts

So if I make a line which is the same dia as someone else's 10lb line, but I call mine 7lb, then mine will break well above its stated weight.

I don't have to bother making a better line, all I have to do is understate the breaking strain.

Let's agree to respect each others views, no matter how wrong yours may be.

 

 

Never attribute to malice that which can be adequately explained by stupidity

 

 

 

http://www.safetypublishing.co.uk/
http://www.safetypublishing.ie/

Link to comment
Share on other sites

Sportsman,

 

How old are you? Surely you are not just now figuring out the usefulness of stated breaking strengths. While it appears you were somewhat tongue in cheek your statement is true.

 

Phone

Link to comment
Share on other sites

OMG I find myself agreeing with Phone!

 

Line diameters and breaking strains are often inaccurate.

 

For braid they are pure fantasy.

 

Its interesting here that most people favour the thicker underrated lines. Kind of expected though if you think you are using 6lb line (based on the label) which is actually 10lb line. It will be a darn sight more robust than an accurately labelled 6lb line.

 

IMO thats why (along with the price) why so many like sensor.

 

Rich

Edited by Kappa
Link to comment
Share on other sites

 

OMG I find myself agreeing with Phone!

 

Line diameters and breaking strains are often inaccurate.

 

For braid they are pure fantasy.

 

Its interesting here that most people favour the thicker underrated lines. Kind of expected though if you think you are using 6lb line (based on the label) which is actually 10lb line. It will be a darn sight more robust than an accurately labelled 6lb line.

 

IMO thats why (along with the price) why so many like sensor.

 

Rich

 

I may well be wrong Rich but I think a lot of the low diameter lines are just normal lines that have been pre stretched (that's what i've read somewhere in the past). Obviously that makes them lower in diameter but it als looses most of the stretch so they are really more susceptible to cracking off. I think that's why there used as hooklengths relying on the mainline for the stretch. That's why I try and use a hooklength as close to or even higher than my mainline as I know the hooklength will snap first but it'll be strong enough to get some the benefit of the stretch in the mainline. I usually try a couple of tests at home just to make sure the bottom will snap first. I don't usually go below 4.6lb when using 6lb mainline.

If I use 6lb sensor i'll use silstar matchman up to 6.6lb as a bottom. Here's a link to an ebay seller that has the line strengths and diameters in the advert....

 

http://www.ebay.co.uk/itm/Silstar-MATCH-TEAM-Hi-Tech-Tournament-Mono-Match-Fishing-Line-NEW-Stock-/351025900487?var=&hash=item51bac62bc7:m:mpzk8HqpeRLjOh9cQcquUYg

Edited by Tigger
Link to comment
Share on other sites

The actual plastics used to manufacture the line also vary, and some of them are stronger and more or less elastic than others. For instance, this looks to be a Japanese factory that offers different specs of nylon - I guess that most of the stuff we see on the market comes out of somewhere similar, there won't be a fishing line factory so much as a monofilament factory that makes whatever spec you ask for.

 

http://www.toray-mono.com/english/product/pro_c002.html

Link to comment
Share on other sites

I have been aware of the accuracy of breaking strains for a long while Phone. It's why I buy lines by dia rather than breaking strain.

I do see many accounts, on here and other forums, on why people prefer line XYZ "It might be a bit thick but it is tough and breaks above it's stated weight"

Err yes, it is heavier line. If I wanted to use heavier line then I would choose to .

Let's agree to respect each others views, no matter how wrong yours may be.

 

 

Never attribute to malice that which can be adequately explained by stupidity

 

 

 

http://www.safetypublishing.co.uk/
http://www.safetypublishing.ie/

Link to comment
Share on other sites

Interestingly, if you ignore the stated breaking strains and compare the different brands by diameter there then seems little to chose between them, for instance in nearly all the brands, the size closest to 0.3mm breaks at around 15lb . . .

Mat

Link to comment
Share on other sites

Not exactly

Sensor 15lb is 0.37mm

Sakuma 20lb is 0.37mm

Let's agree to respect each others views, no matter how wrong yours may be.

 

 

Never attribute to malice that which can be adequately explained by stupidity

 

 

 

http://www.safetypublishing.co.uk/
http://www.safetypublishing.ie/

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We and our partners use cookies on our website to give you the most relevant experience by remembering your preferences, repeat visits and to show you personalised advertisements. By clicking “I Agree”, you consent to the use of ALL the cookies. However, you may visit Cookie Settings to provide a controlled consent.