B1g-Dav3

For the past 5 to 6 months i've been extremly busy with college to have the time to finish what I started but as it is winter and the time which I would of used for major fishing I can use to continue to Build a bait boat from scratch. To those of you who have joined AnglersNet any time after about june 06 will probably not have seen the start of this thread so it is HERE for you to get up to date. As for what i'm in the prosses of doing at the moment towards the baitboat is purchasing all the electrics which are needed and I will list them as I purchase them for those who are interested.

Well it would be great if you could get some pupplier names for those who are following this forum. I am sure i can get some through college so it will be dirt cheep. Also I will find out were D+T get there maerials from ASAP.

Quite right a boat of its size would have to hoppers. I guess this design will probalby in total carry 3 kilos of e.g pellets but that is a rough estimate. I will start by using some cheep 5mm thick ply wood overlaying it with fibre glass. Probalbly. And to get the curve at the front and back i will use ply wood and fill the front with polystyrine sheet and sand it to the required shape then plaster it lightly then sand again and then coating it in fiber glass. Not quite I think in total it will cost around £150 but thats including transmitter and reciever which is where the money will go. Well I think if this design of boat was retailed with dual hopper and twin motor it would probably cost from £600 - £1000 so i would say it is quite cheaper than retail. Hope this has answered your questions sufficiently

Atfer many concept ideas I have finally drawn up what I feel will be the choosen design. Now atfer drawing it I could'nt scan it in as it was on A3 paper but I have used a simple microsoft program to recreate the drawing. I would most appretiate if you could add your opinions. And i will get onto drawing up a technical drawing taking into account size of boat to size of electronics etc. B1G-DAV3

I was using that as an expresion. Yes of course I will provide all information as I get it.

I would not have the time to make and sell them I'm at college during the week. (USING COLLEGE COMPUTER AT THE MOMENT)And I work at the weekend to earn fishing spending money. I just want to help people who are not sure what to do. So i will post each step e.g. screw into this screw hole. To make it simple for those who interested. B1g-Dav3

I've come to the conclusion that the only way i'm going to get a bait boat for less than £300 is if I build my own from scratch. So over the next 3-4 months I will post my success or failure of every part from designing to building to taking it on to the water. Any one who is intested i will post all diagrams and details on how to do this so you can follow from step to step until finally creating your own bait boat. Its all well and good buying a bait boat and using it. But you will feel on top of the world if you built the boat which help you catch your personal best. I'm going to start by drawing up some concept ideas and if you feel up to a chalange then draw up some of your ideas and post them. B1g-Dav3

No i'm not rooney888. Just used his ebay login to sell the item because he's got a higher feedback rating even though mine is 100%. And to miss spell one word is not bad.

Just over 20min left on this exelent PC

Brand New custom built AMD Sempron 1.8ghz PC = 250 pounds. Perfect computer if you want to upgrade and perfect price if your new to the techno. This again is at whole sale price: Amd Sempron Proccessoer = 60 MotherBoard = 40 80gb HardDrive = 40 256mb RAM = 20 64mb Graphics 25 Tower = 25 DVD+/-RW Dual Layer = 30 3 1/2 inch floppy = 5 Keyboard + Mouse = 15 =260 OS = XP Pro = 110 Free Software 100+ Total price 470+ ALL THIS GREAT PC 250 pound. If anyone is interested post your thougts or send me a message if i've won you over.

Good system & great price. Needs more memory though and I wouldn't try to run that beast with less than 1Gb with 2Gb being a really comfortable amount. Can you upgrade at below the price available from a direct memory buy from someone? Based on the listing, a buyer will need a monitor though. This spec has been put together to suite the processor (1.8ghz) But anyone who whats to change certain things such as memory can email me and i will change that for that individual. Iv'e just done this to keep the price down same for not including a monitor. This computer has been listed for anyone who wants to upgrade there system. But as ive said anyone who would like to add/change/remove items from the spec can do so and email me and i will reply as soon as posible which a price. Are you selling for £319.99 or £400? Well as listed on ebay the starting bid is £319.99 and the BIN Price is £400 but anyone who would like this spec computer can email me and i will sell it for £319.99 also other spec computers are available. Well to be honest any spec computer is available if you interestet just send me an email with your desired specification. However, the listing needs amending since he shows IE & OE as being part of his additional software when in fact, both are part of the OS and does not show Outlook which is a standard part of every MS Office version I'm familiar with. Yes sorry i will have to amend the listing when installing XP Pro it does come pre installed IE and OE but what i ment to put on is that My software includes IE 2003 and OE 2003. Anyone who is interested please do email me and include the following: custom-computers@hotmail.co.uk Processor, Size of Ram, Hard Drive, Graphics Card, Optical Drives, Colour of the unit (will determin colour of mouse keyboard optical drives, Any specific tower and place you would find it, Thank you everyone who has looked so far and please continue to add your own thoughts.

I'm selling this computer on ebay for £319.99 which is a complete bargain if you price up the specification AMD Athlon 64 3000+ £120 AMD Motherboard (No Cheap Crap) £50 512mb RAM £25 160gb Hard Drive £60 128mb Geforce 5200 Graphics card £30 Tower with 4 usb slots £20 Mice + Keyboard £10 Xp Pro OS £60 Software £100+ TOTAL £475+ And all this for £319.99 Plus it is all built so you dont have to do any of the work. Similar items are being sold but do not include OS or starter software so is pretty useless. If you dont believe the above prices check for yourself FOR EXAMPLE I'm Selling this Item on ebay so check it out for pictures and the list of software included. Click this link to view item If this computer is to pricey for you or you dont need such a powerfull processor but still interested in buying a new PC then e-mail me at: custom-computers@hotmail.co.uk and i can price you up a cheaper computer.

I dont know about the hengelsport box but Badger do a good quality seat box which is reasonabbly priced. If your going for something expensive to show off i would'nt bother with badger but badgers boxex are cheap and cheerful. Hope you look on this site and something takes your fancy. Hope this helps.

I went last Sunday for a night and had two pike during the night one 19lb 11 ounces and the other 20lb 4 ounces. Both nice fish. I'm affraid I have no pictures because the camara I took had dead battries and it uses those l-ion battries so I could noy buy any replacements. Couldnt sleep in the day so was completed shattered monday. . Anyways cheers for the advice it was great help.

Well i will be fishing no further than 100 yards, Carp upto 30lb, Large amounts of weed but will continue to use lead clips, Not that snaggy. Also just to be pickey i would prefer if the rod was either 11' or 3 sections.