baitboat repairer

Hi Richard If i bought all your weigh slings you have left how many would that be, and Is that the best price you can give for them all, Also would you be able to deliver them to peterborough pe2 5nn i would of course pay postage. Many Thanks. Steve.

NOT bEEN ON HERE LONG MYSELF WELCOM TO THE FORUM BUDDY

thank i never thought of that cheers

Hi sorry it is a t4vf this is a picture of a mkI i repaired recently, i have also got another one in at the moment and the handset is the same, but either will do the job as long as it is 40mhz

Hi Is your a mkI or mark II

Hi everyone Just thought i would introduce myself. My name is steve and i am located in peterborough cambridgeshire. I can repair/restore/or even convert your bait boat,i can add any modifications to your baitboat from lights to new motors. I have 15 years experience in this subject. I am in the process of starting a baitboat repair and service business, so if you are having any problems with any baitboat just mesage me on this site or you can email me at bandmbaitboats@hotmail.co.uk. Many Thanks Steve. GOOD THINGS COME TO THOSE WHO BAIT

Hi phil do you have any slings left Cheers Steve

HI I AM LOOKING FOR ANY BAITBOATS THAT ARE EITHER DAMAGED, ELECTRICS BLOWN, PARTS MISSING, ANYTHING CONSIDERED OR ANY BAITBOATS OR BAITBOAT ACCESORIES THAT ARE JUST SITTING IN YOUR GARGE OR WORKSHOP GATHERING DUST. PLEASE MESSAGE ME MANY THANKS STEVE

Hi Its steve again Have just looked for one in my workshop unfortunatly i dont have one. I have found you one though go on ebay and put this number in 120908114972 this is the transmitter you will need, it is exactly the same as the original one it is 40mhz, all you will need to do is find out what mhz is used in the boat just buy the crystall set you need and your away . The only problem with this is you will need to open your boat up and there will be a grey box on the left hand side this will have your crystall enclosed in it read what mhz it is and buy a new set on that frequency, put the rx into the boat and the tx into your handset and this should work a treat. Take a look at my video and you will see that there is a lip all around the hull when opening the boat do not cut this as it will be a nightmare to reseal the link is http://youtu.be/o8Tpr65o4_E this is my youtube account of some of the repairs i have done. Take a look Cheers steve

Hi I can help you with this is your microcat a mk1 and if so it should be 40mhz, i repair baitboats so i will have a look what i can do for you and let you know in due course, am i right in thinking that the hoppers are on the left stick left and right, the lights on and off up/down and the right stick is forward reverse left and right. You actually need a skysport 4 tv4f 40 mhz 4 channel. Cheers Steve

Hi There I have just joined the forum, i repair bait boats, i am in peterborough. Could you let me know what baitboat you have and the problems you are having and i will see if i can help you Many Thanks Steve B and M Baitboats

Hi Many thanks for your support, i do not have a website at present, this is the next item on my agenda. I think i am replying in the right place properly. Many Thanks Steve

Hi the electric bleeping noise, is just the motor, does this only happen when you go forward with the boat, iff so put the boat on a level surface, push forward on the throttle and keep it there, whilst the motor is running at full speed spray a small amount of wd40 through the ventilation hole in the side of the motor this will quieten the motor down, keep the motor running for about 1 minute and you will hesr the difference, it will be a lot quieter and a lot more responsive. Cheers Steve

Hi I am new to the forum, i repair baitboats and a lot of people are having the same problem, many of my customers have asked me to make an extra cage to fit around the pump intake, i have done this and it has solved the problem with getting stuck on lilly pads, and sucking weeds into the impeller. etc, when the pump housing catches a lilly pad the small holes get blocked and does not allow the boat to suck water into the impeller thus boat not moving. remove the pump cover. If you get a splash guard for a saucepan this has a very fine mesh(available from any pound shop). Cut this into a round shape 25mm larger than the pump housing, leave three legths of mesh around 30mm long where the holes are in the pump housing, bend them over and make a hole for the screws of the housing to go through, place this over the housing and bend to shape, if you do this right it should sit over the original housing and you will never get stuck again. Hope this has helped. steve

Hi Everybody My name is Steve, I have been involved in r/c boats for 15 years. I am in the process of starting my Baitboat Repair Business. I have had many customers who have been very happy with my service. I can restore, repair, or convert most baitboats to customers requirements. I convert Dynacraft baitboats to 12v using 2.4ghz transmitter and receiver, speed controller, servo for hopper and steering, all completed to a high standard. i have recently repaired a BSA Lakestar, x2 Microcats, x2 BSA Pocket Rockets, and around 30 ish Dynacrafts, 13 of which were full conversions. I am reasonably priced. I would be very greatfull to all at anglers net for your support. I have a youtube account where i post my recent repairs, please take a look, this is my latest repair http://youtu.be/fV14WgBZzhQ. I can give advise to anyone who is having problems with their baitboat, I am more than happy to help. I also have an email address if you would like to send me some pictures and details of the problems you are having, and i will get back to you asap if i can help. bandmbaitboats@hotmail.co.uk I do hope that i will have a long and happy time with anglersnet.