Jump to content

'Home made' centerpins

viney

By viney
in Coarse Fishing

 Share

Recommended Posts

Rusty Member

Rusty

Posted
Posted (edited)

Worms has, he's your man.

 

Read this thread for inspiration, there's some good tips on what to think about when designing and measuring but if you want to see the (quite incredible) end result skip to page 14.

 

http://www.traditionalfisherman.com/viewtopic.php?f=91&t=2737

Edited by Rusty

It's never a 'six', let's put it back

Link to comment
Share on other sites
barry luxton Member

barry luxton

Posted
Posted

Nicks multiplyer is a bit special as well.

Free to choose apart from the ones where the trust poked their nose in. Common eel. tope. Bass and sea bream. All restricted.


New for 2016 TAT are the main instigators for the demise of the u k bass charter boat industry, where they went screaming off to parliament and for the first time assisting so called angling gurus set up bass take bans with the e u using rubbish exaggerated info collected by ices from anglers, they must be very proud.

Upgrade, the door has been closed with regards to anglers being linked to the e u superstate and the failed c f p. So TAT will no longer need to pay monies to the EAA anymore as that org is no longer relevant to the u k . Goodbye to the europeon anglers alliance and pathetic restrictions from the e u.

Angling is better than politics, ban politics from angling.

Consumer of bass. where is the evidence that the u k bass stock need angling trust protection. Why won't you work with your peers instead of castigating them. They have the answer.

Recipie's for mullet stew more than welcomed.

Angling sanitation trust and kent and sussex sea anglers org delete's and blocks rsa's alternative opinion on their face book site. Although they claim to rep all.

new for 2014. where is the evidence that the south coast bream stock need the angling trust? Your campaign has no evidence. Why won't you work with your peers, the inshore under tens? As opposed to alienating them? Angling trust failed big time re bait digging, even fish legal attempted to intervene and failed, all for what, nothing.

Looks like the sea angling reps have been coerced by the ifca's to compose sea angling strategy's that the ifca's at some stage will look at drafting into legislation to manage the rsa, because they like wasting tax payers money. That's without asking the rsa btw. You know who you are..

Link to comment
Share on other sites
Chris Plumb Member

Chris Plumb

Posted
Posted

Worms has, he's your man.

 

Read this thread for inspiration, there's some good tips on what to think about when designing and measuring but if you want to see the (quite incredible) end result skip to page 14.

 

http://www.traditionalfisherman.com/viewtopic.php?f=91&t=2737

Thanks for that - Chris that is some thread - amazing!

 

C

  • Like 1

"Study to be quiet." ><((º> My Blog

Link to comment
Share on other sites
chesters1 Member

chesters1

Posted
Posted

Worms has, he's your man.

 

Read this thread for inspiration, there's some good tips on what to think about when designing and measuring but if you want to see the (quite incredible) end result skip to page 14.

 

http://www.traditionalfisherman.com/viewtopic.php?f=91&t=2737

A bit of white gloss and it would be stunning

Believe NOTHING anyones says or writes unless you witness it yourself and even then your eyes can deceive you

None of this "the enemy of my enemy is my friend" crap it just means i have at least two enemies!

 

There is only one opinion i listen to ,its mine and its ALWAYS right even when its wrong

 

Its far easier to curse the darkness than light one candle

 

Mathew 4:19

Grangers law : anything i say will  turn out the opposite or not happen at all!

Life insurance? you wont enjoy a penny!

"To compel a man to furnish contributions of money for the propagation of opinions which he disbelieves and abhors, is sinful and tyrannical." Thomas Jefferson

Link to comment
Share on other sites
viney Member

viney

Posted
  • Author
Posted

Managed to make time to read half of the thread so far but amazing, thanks for posting it! It's answered a few of the little bits I couldn't figure out in my head.

 

Got a rough plan coming together just need to find some time to get it started

http://www.basingengineering.co.uk/

 

Instagram: mrmjv88

Link to comment
Share on other sites
chavender Member

chavender

Posted
Posted

I think theres also someware on here ,a thread or two on a home built aerial from a couple of years ago and a bit further back in time is the threads on the AN pin .but you'll have too do a search too find them.

owls22dx.gif

Chavender
I try to be funny... but sometimes I merely look it! hello.gif Steve

Link to comment
Share on other sites
viney Member

viney

Posted
  • Author
Posted

Some very good info on those threads, hopefully I can get mine to anywhere near that level! Fairly happy with how I will make the spool/hub and spindle etc. Just need to figure out a ratchet mechanism and do a rough design (although I know in my head how I want it to look, getting that onto paper with the drawing talent of a 3 year old poses an issue in itself!)

http://www.basingengineering.co.uk/

 

Instagram: mrmjv88

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We and our partners use cookies on our website to give you the most relevant experience by remembering your preferences, repeat visits and to show you personalised advertisements. By clicking “I Agree”, you consent to the use of ALL the cookies. However, you may visit Cookie Settings to provide a controlled consent.

  I accept